| Model |
EP100
|
| Pictures
|
|
|
Technical Data
|
| Horizontal Accuracy |
+/-30"
|
Vertical Accuracy |
+/-30"
|
| Level Sensitivity |
60"/2mm
|
Light Source |
Laser Diode
|
| Wavelength |
635nm
|
Output power |
less than 1mW
|
| Working Radius |
10m (rotating without detector), 100m ( rotating with detector)
|
Working Range (not rotating) |
30m
|
| Rotating Speed |
0--500r/min
|
Power Source |
6V (4 "AA" batteries)
|
| Batteries' life |
12 hours
|
Working Temperature |
-10 Centigrade -- +50 Centigrade (+14 Fahrenheit -- +122 Fahrenheit)
|
| Center Screw |
5/8" X 11
|
Outside Dimension |
110mm X 110mm X 155mm
|
| Carrying Case Dimension |
200mm X 190mm X 160mm
|
Package Dimension |
205mm X 205mm X 180mm
|
| Net Weight |
Laser Level EP100 0.8Kg, Base 0.5Kg
|
Gross Weight |
2.2Kg
|
|
Standard Equipment
|
Laser Level Model EP100
|
Base
|
Target
|
Carrying Case
|
|
| Model |
|
| Pictures
|
|
|
Technical Data
|
| Horizontal Accuracy |
+/-20"
|
Vertical Accuracy |
+/-20"
|
| Level Sensitivity |
40"/2mm
|
Light Source |
Laser Diode
|
| Wavelength |
635nm
|
Output power |
less than 5mW
|
| Working Radius |
30m (rotating without detector), 100m ( rotating with detector)
|
Beam Spot Diameter |
5.5mm
|
| Rotating Speed |
0--300r/min
|
Power Source |
4.8V (built-in 2.4v (2) "AA" 1.2KmAh rechargeable NI-MH batteries)
|
| Batteries' working time |
15 hours
|
Working Temperature |
-10 Centigrade -- +50 Centigrade (+14 Fahrenheit -- +122 Fahrenheit)
|
| Center Screw |
5/8" X 11
|
Outside Dimension |
100mm X 108mm X 160mm
|
| Carrying Case Dimension |
315mm X 200mm X 195mm
|
Package Dimension |
320mm X 205mm X 200mm
|
| Net Weight |
1.5Kg
|
Gross Weight |
3.2Kg
|
|
Standard Equipment
|
Carrying Case
|
- Laser Level Model EP200
- Leveling Mount
- Target (2pcs)
- Rechargeable Batteries (built-in)
- Battery Charger
- Wrench
- Carrying Case
|
|
| Model |
|
| Pictures
|
|
|
Specification
|
| Laser beam accuracy |
Level accuracy
|
1/4 inch at 100feet |
|
Plumb accuracy
|
1/4 inch at 25feet |
| Effective range |
100m with digital receiver
|
| Rotary speed |
High speed
|
About 550 rpm |
|
Low speed
|
About 300 rpm |
| Laser power |
2 mW
|
|
Bump Sensor
|
Bump Sensor
|
- There is an inner bump sensor. Press SET/RESET switch button, bump sensor stands by, LED on top appears yellow. LED becomes red and flashing when TRL is bumped. Laser beam stop rotating at the same time. Press SET/RESET switch button to restore original state of laser beam.
|
|
|
Receiver Of EP300
|
| Display |
LCD readouts
|
Audio Tone |
3 pitches
|
| Mode of Signal Deviation |
Audio Tone and LCD readouts
|
Detection Range |
32mm
|
| Detective Precision |
±1mm
|
Power Supply |
4.5V (3AAA Alkaline battery)
|
| Continuous Operating Time |
30 hour at 20°C
|
Low Battery Warning |
Yes (display)
|
| Auto Power Cut Off |
5 minutes if no beam incidence
|
Operating Temperature |
-10°C to 50°C
|
| Storage Temperature |
-20°C to 60°C
|
Dimensions |
60 X 23 X 119(mm)
|
| Weight |
85g (no battery)
|
|
Standard Package
|
|
|